Scan Bericht 522 - HP photosmart prem c410 series

Start

Scanner

Hersteller: HP
Modell: photosmart prem c410 series
Name: libinsane:sane:hpaio:/net/photosmart_prem_c410_series?ip=192.168.1.15&queue=false
Device ID: HP photosmart prem c410 series
Typ: Flatbed_Adf_Duplex

mode
- title: Scan mode
- desc: Selects the scan mode (e.g., lineart, monochrome, or color).
- type: <GType gchararray (64)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: ['LineArt', 'Gray', 'Color']
- initial_value: Color
resolution
- title: Scan resolution
- desc: Sets the resolution of the scanned image.
- type: <GType gint (24)>
- unit: <enum LIBINSANE_UNIT_DPI of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: [75, 100, 150, 200, 300, 600]
- initial_value: 300
contrast
- title: Contrast
- desc: Controls the contrast of the acquired image.
- type: <GType gint (24)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: [-127, 127, 0]
- initial_value: 0
brightness
- title: Brightness
- desc: Controls the brightness of the acquired image.
- type: <GType gint (24)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: [-127, 127, 0]
- initial_value: 0
compression
- title: Compression
- desc: Selects the scanner compression method for faster scans, possibly at the expense of image quality.
- type: <GType gchararray (64)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: ['None', 'JPEG']
- initial_value: None
jpeg-quality
- title: JPEG compression factor
- desc: Sets the scanner JPEG compression factor. Larger numbers mean better compression, and smaller numbers mean better image quality.
- type: <GType gint (24)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT | LIBINSANE_CAPABILITY_INACTIVE of type Libinsane.Capability>
- constraint: [0, 100, 0]
- initial_value: (Exception: libinsane-quark: Libinsane opt[jpeg-quality]->get_value() error: 0x40000008, Access denied (9))
batch-scan
- title: Batch scan
- desc: Enables continuous scanning with automatic document feeder (ADF).
- type: <GType gboolean (20)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: []
- initial_value: False
source
- title: Scan source
- desc: Selects the scan source (such as a document-feeder).
- type: <GType gchararray (64)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: ['Auto', 'Flatbed', 'ADF']
- initial_value: ADF
duplex
- title: Duplex
- desc: Enables scanning on both sides of the page.
- type: <GType gboolean (20)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: []
- initial_value: False
length-measurement
- title: Length measurement
- desc: Selects how the scanned image length is measured and reported, which is impossible to know in advance for scrollfed scans.
- type: <GType gchararray (64)>
- unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: ['Unknown', 'Approximate', 'Padded']
- initial_value: Padded
tl-x
- title: Top-left x
- desc: Top-left x position of scan area.
- type: <GType gdouble (60)>
- unit: <enum LIBINSANE_UNIT_MM of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: [0.0, 215.89999389648438, 0.0]
- initial_value: 0.0
tl-y
- title: Top-left y
- desc: Top-left y position of scan area.
- type: <GType gdouble (60)>
- unit: <enum LIBINSANE_UNIT_MM of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: [0.0, 381.0, 0.0]
- initial_value: 0.0
br-x
- title: Bottom-right x
- desc: Bottom-right x position of scan area.
- type: <GType gdouble (60)>
- unit: <enum LIBINSANE_UNIT_MM of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: [0.0, 215.89999389648438, 0.0]
- initial_value: 215.89999389648438
br-y
- title: Bottom-right y
- desc: Bottom-right y position of scan area.
- type: <GType gdouble (60)>
- unit: <enum LIBINSANE_UNIT_MM of type Libinsane.Unit>
- capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
- constraint: [0.0, 381.0, 0.0]
- initial_value: 381.0

Testscan

OS: Linux

erfolgreiche Tests: True

Quelle: feeder
Auslösung: 300 dpi
Modus: Color

This document had been well scanned but the preview scanned document in menu "let's scan" show a blank part in bottom.
The preview is length than original document. 
I don't know if it's normal.
Best Reagrds,
Jordan.

traces.txt: [raw] [colorized]

page_000.png:
scan result page_000.png page_000_boxes.png:
scan result page_000_boxes.png

Zusätzliche Informationen

OS type: posix
Test program: IronScanner 3.0.1-21-ga0a0d4e
Scan library: Libinsane 1.0.9-13-g0640a77
Pillow: 9.0.1
Python version: 3.10.4 (main, Apr 2 2022, 09:04:19) [GCC 11.2.0]
Architecture: ('64bit', 'ELF')
Platform:
- Short: Linux
- Detailed: ('ubuntu', '22.04', 'Jammy Jellyfish')
- Release: 5.15.0-37-generic
- System: Linux

Architecture: ('64bit', 'ELF')
CPU frequency: 3100
Number of CPUs: 8
Processor: x86_64
Machine: x86_64
Memory: 16725389312

Reported by: [Jordan]

REST API link: /api/v1/scannerdb/scan_reports/522/