Scan Bericht 247 - FUJITSU fi-5120Cdj

Scanner

  • Hersteller: FUJITSU
  • Modell: fi-5120Cdj
  • Name: FUJITSU fi-5120Cdj
  • Device ID: sane:fujitsu:fi-5120Cdj:32392
  • Typ: Adf_Duplex
 scanner type
  1. threshold
    • constraint: [0, 255, 1]
    • initial_value: 0
    • title: Threshold
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Select minimum-brightness to get a white point
    • type: <GType gint (24)>
  2. email
    • constraint: []
    • initial_value: False
    • title: Email button
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Email button
    • type: <GType gboolean (20)>
  3. matrix-5x5
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[matrix-5x5]->get_value() error: 0x40000008, Access denied (9))
    • title: Matrix 5x5
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Remove 5 pixel square noise
    • type: <GType gboolean (20)>
  4. page-height
    • constraint: [0.0, 863.48876953125, 0.0211639404296875]
    • initial_value: 863.48876953125
    • title: Page height
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_MM of type Libinsane.Unit>
    • desc: Specifies the height of the media.
    • type: <GType gdouble (60)>
  5. swdespeck
    • constraint: [0, 9, 1]
    • initial_value: 0
    • title: Software despeckle diameter
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Maximum diameter of lone dots to remove from scan.
    • type: <GType gint (24)>
  6. wl-follow
    • constraint: ['Default', 'On', 'Off']
    • initial_value: (Exception: libinsane-quark: Libinsane opt[wl-follow]->get_value() error: 0x40000008, Access denied (9))
    • title: White level follower
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Control white level follower
    • type: <GType gchararray (64)>
  7. compression
    • constraint: ['None']
    • initial_value: (Exception: libinsane-quark: Libinsane opt[compression]->get_value() error: 0x40000008, Access denied (9))
    • title: Compression
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Enable compressed data. May crash your front-end program
    • type: <GType gchararray (64)>
  8. tl-x
    • constraint: [0.0, 224.845703125, 0.0211639404296875]
    • initial_value: 0.0
    • title: Top-left x
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_MM of type Libinsane.Unit>
    • desc: Top-left x position of scan area.
    • type: <GType gdouble (60)>
  9. double-feed
    • constraint: []
    • initial_value: False
    • title: Double feed
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Double feed detected
    • type: <GType gboolean (20)>
  10. endorser-bits
    • constraint: [16, 24, 8]
    • initial_value: (Exception: libinsane-quark: Libinsane opt[endorser-bits]->get_value() error: 0x40000008, Access denied (9))
    • title: Endorser bits
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Determines maximum endorser counter value.
    • type: <GType gint (24)>
  11. tl-y
    • constraint: [0.0, 863.48876953125, 0.0211639404296875]
    • initial_value: 0.0
    • title: Top-left y
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_MM of type Libinsane.Unit>
    • desc: Top-left y position of scan area.
    • type: <GType gdouble (60)>
  12. gamma
    • constraint: [0.29998779296875, 5.0, 0.0099945068359375]
    • initial_value: (Exception: libinsane-quark: Libinsane opt[gamma]->get_value() error: 0x40000008, Access denied (9))
    • title: Gamma function exponent
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Changes intensity of midtones
    • type: <GType gdouble (60)>
  13. endorser-font
    • constraint: ['Horizontal', 'Horizontal bold', 'Horizontal narrow', 'Vertical', 'Vertical bold']
    • initial_value: (Exception: libinsane-quark: Libinsane opt[endorser-font]->get_value() error: 0x40000008, Access denied (9))
    • title: Endorser font
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Endorser printing font.
    • type: <GType gchararray (64)>
  14. side
    • constraint: []
    • initial_value: False
    • title: Duplex side
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Tells which side (0=front, 1=back) of a duplex scan the next call to sane_read will return.
    • type: <GType gboolean (20)>
  15. resolution
    • constraint: [50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, 450, 475, 500, 525, 550, 575, 600]
    • initial_value: 300
    • title: Scan resolution
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_DPI of type Libinsane.Unit>
    • desc: Sets the resolution of the scanned image.
    • type: <GType gint (24)>
  16. omr-df
    • constraint: []
    • initial_value: False
    • title: OMR or DF
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: OMR or double feed detected
    • type: <GType gboolean (20)>
  17. lowmemory
    • constraint: []
    • initial_value: False
    • title: Low Memory
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Limit driver memory usage for use in embedded systems. Causes some duplex transfers to alternate sides on each call to sane_read. Value of option 'side' can be used to determine correct image. This option should only be used with custom front-end software.
    • type: <GType gboolean (20)>
  18. endorser-side
    • constraint: ['Front', 'Back']
    • initial_value: (Exception: libinsane-quark: Libinsane opt[endorser-side]->get_value() error: 0x40000008, Access denied (9))
    • title: Endorser side
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Endorser printing side, requires hardware support to change
    • type: <GType gchararray (64)>
  19. scan
    • constraint: []
    • initial_value: False
    • title: Scan button
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Scan button
    • type: <GType gboolean (20)>
  20. adv-paper-protect
    • constraint: ['Default', 'Off', 'On']
    • initial_value: (Exception: libinsane-quark: Libinsane opt[adv-paper-protect]->get_value() error: 0x40000008, Access denied (9))
    • title: Advanced paper protection
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Request scanner to predict jams in the ADF using improved sensors
    • type: <GType gchararray (64)>
  21. df-action
    • constraint: ['Default', 'Continue', 'Stop']
    • initial_value: Default
    • title: DF action
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Action following double feed error
    • type: <GType gchararray (64)>
  22. top-edge
    • constraint: []
    • initial_value: False
    • title: Top edge
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Paper is pulled partly into adf
    • type: <GType gboolean (20)>
  23. function
    • constraint: []
    • initial_value: 1
    • title: Function
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Function character on screen
    • type: <GType gint (24)>
  24. density
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[density]->get_value() error: 0x40000008, Access denied (9))
    • title: Density
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Density dial
    • type: <GType gint (24)>
  25. page-width
    • constraint: [0.0, 224.845703125, 0.0211639404296875]
    • initial_value: 224.845703125
    • title: Page width
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_MM of type Libinsane.Unit>
    • desc: Specifies the width of the media. Required for automatic centering of sheet-fed scans.
    • type: <GType gdouble (60)>
  26. variance
    • constraint: [0, 255, 1]
    • initial_value: 0
    • title: Variance
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Set SDTC variance rate (sensitivity), 0 equals 127
    • type: <GType gint (24)>
  27. skew-angle
    • constraint: []
    • initial_value: 0
    • title: Skew angle
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Requires black background for scanning
    • type: <GType gint (24)>
  28. power-save
    • constraint: []
    • initial_value: False
    • title: Power saving
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Scanner in power saving mode
    • type: <GType gboolean (20)>
  29. paper-protect
    • constraint: ['Default', 'Off', 'On']
    • initial_value: (Exception: libinsane-quark: Libinsane opt[paper-protect]->get_value() error: 0x40000008, Access denied (9))
    • title: Paper protection
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Request scanner to predict jams in the ADF
    • type: <GType gchararray (64)>
  30. error-code
    • constraint: []
    • initial_value: 0
    • title: Error code
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Hardware error code
    • type: <GType gint (24)>
  31. blueoffset
    • constraint: [-16, 16, 1]
    • initial_value: (Exception: libinsane-quark: Libinsane opt[blueoffset]->get_value() error: 0x40000008, Access denied (9))
    • title: Blue offset
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Adjust blue/red offset
    • type: <GType gint (24)>
  32. duplexoffset
    • constraint: [-16, 16, 1]
    • initial_value: (Exception: libinsane-quark: Libinsane opt[duplexoffset]->get_value() error: 0x40000008, Access denied (9))
    • title: Duplex offset
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Adjust front/back offset
    • type: <GType gint (24)>
  33. ht-type
    • constraint: ['Default', 'Dither', 'Diffusion']
    • initial_value: (Exception: libinsane-quark: Libinsane opt[ht-type]->get_value() error: 0x40000008, Access denied (9))
    • title: Halftone type
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Control type of halftone filter
    • type: <GType gchararray (64)>
  34. cover-open
    • constraint: []
    • initial_value: False
    • title: Cover open
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Cover open
    • type: <GType gboolean (20)>
  35. swcrop
    • constraint: []
    • initial_value: False
    • title: Software crop
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Request driver to remove border from pages digitally.
    • type: <GType gboolean (20)>
  36. brightness
    • constraint: [-127, 127, 1]
    • initial_value: 0
    • title: Brightness
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Controls the brightness of the acquired image.
    • type: <GType gint (24)>
  37. halt-on-cancel
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[halt-on-cancel]->get_value() error: 0x40000008, Access denied (9))
    • title: Halt on Cancel
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Request driver to halt the paper feed instead of eject during a cancel.
    • type: <GType gboolean (20)>
  38. emphasis
    • constraint: [-128, 127, 1]
    • initial_value: 0
    • title: Emphasis
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Negative to smooth or positive to sharpen image
    • type: <GType gint (24)>
  39. rif
    • constraint: []
    • initial_value: False
    • title: RIF
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Reverse image format
    • type: <GType gboolean (20)>
  40. df-recovery
    • constraint: ['Default', 'Off', 'On']
    • initial_value: (Exception: libinsane-quark: Libinsane opt[df-recovery]->get_value() error: 0x40000008, Access denied (9))
    • title: DF recovery mode
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Request scanner to reverse feed on paper jam
    • type: <GType gchararray (64)>
  41. b4-paper
    • constraint: []
    • initial_value: False
    • title: B4 paper
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: B4 paper detected
    • type: <GType gboolean (20)>
  42. mirroring
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[mirroring]->get_value() error: 0x40000008, Access denied (9))
    • title: Mirroring
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Reflect output image horizontally
    • type: <GType gboolean (20)>
  43. greenoffset
    • constraint: [-16, 16, 1]
    • initial_value: (Exception: libinsane-quark: Libinsane opt[greenoffset]->get_value() error: 0x40000008, Access denied (9))
    • title: Green offset
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Adjust green/red offset
    • type: <GType gint (24)>
  44. endorser-options
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[endorser-options]->get_value() error: 0x40000008, Access denied (9))
    • title: Endorser Options
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Controls for endorser unit
    • type: <GType gboolean (20)>
  45. endorser-step
    • constraint: [-2, 2, 1]
    • initial_value: (Exception: libinsane-quark: Libinsane opt[endorser-step]->get_value() error: 0x40000008, Access denied (9))
    • title: Endorser step
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Change endorser counter value by this much for each page.
    • type: <GType gint (24)>
  46. contrast
    • constraint: [-127, 127, 1]
    • initial_value: 0
    • title: Contrast
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Controls the contrast of the acquired image.
    • type: <GType gint (24)>
  47. ald
    • constraint: []
    • initial_value: False
    • title: Auto length detection
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Scanner detects paper lower edge. May confuse some frontends.
    • type: <GType gboolean (20)>
  48. duplex
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[duplex]->get_value() error: 0x40000008, Access denied (9))
    • title: Duplex switch
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Duplex switch
    • type: <GType gboolean (20)>
  49. ht-pattern
    • constraint: [0, 3, 1]
    • initial_value: (Exception: libinsane-quark: Libinsane opt[ht-pattern]->get_value() error: 0x40000008, Access denied (9))
    • title: Halftone pattern
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Control pattern of halftone filter
    • type: <GType gint (24)>
  50. page-loaded
    • constraint: []
    • initial_value: True
    • title: Page loaded
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Page loaded
    • type: <GType gboolean (20)>
  51. source
    • constraint: ['ADF Front', 'ADF Back', 'ADF Duplex']
    • initial_value: ADF Front
    • title: Scan source
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Selects the scan source (such as a document-feeder).
    • type: <GType gchararray (64)>
  52. manual-feed
    • constraint: []
    • initial_value: False
    • title: Manual feed
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Manual feed selected
    • type: <GType gboolean (20)>
  53. br-y
    • constraint: [0.0, 863.48876953125, 0.0211639404296875]
    • initial_value: 863.48876953125
    • title: Bottom-right y
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_MM of type Libinsane.Unit>
    • desc: Bottom-right y position of scan area.
    • type: <GType gdouble (60)>
  54. compression-arg
    • constraint: [0, 7, 1]
    • initial_value: (Exception: libinsane-quark: Libinsane opt[compression-arg]->get_value() error: 0x40000008, Access denied (9))
    • title: Compression argument
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Level of JPEG compression. 1 is small file, 7 is large file. 0 (default) is same as 4
    • type: <GType gint (24)>
  55. dropoutcolor
    • constraint: ['Default', 'Red', 'Green', 'Blue']
    • initial_value: Default
    • title: Dropout color
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: One-pass scanners use only one color during gray or binary scanning, useful for colored paper or ink
    • type: <GType gchararray (64)>
  56. df-thickness
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[df-thickness]->get_value() error: 0x40000008, Access denied (9))
    • title: DF thickness
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Enable double feed error due to paper thickness
    • type: <GType gboolean (20)>
  57. outline
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[outline]->get_value() error: 0x40000008, Access denied (9))
    • title: Outline
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Perform outline extraction
    • type: <GType gboolean (20)>
  58. bgcolor
    • constraint: ['Default', 'White', 'Black']
    • initial_value: Default
    • title: Background color
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Set color of background for scans. May conflict with overscan option
    • type: <GType gchararray (64)>
  59. matrix-2x2
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[matrix-2x2]->get_value() error: 0x40000008, Access denied (9))
    • title: Matrix 2x2
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Remove 2 pixel square noise
    • type: <GType gboolean (20)>
  60. df-length
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[df-length]->get_value() error: 0x40000008, Access denied (9))
    • title: DF length
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Enable double feed error due to paper length
    • type: <GType gboolean (20)>
  61. noise-removal
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[noise-removal]->get_value() error: 0x40000008, Access denied (9))
    • title: Noise removal
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Noise removal
    • type: <GType gboolean (20)>
  62. sleeptimer
    • constraint: [0, 60, 1]
    • initial_value: 0
    • title: Sleep timer
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Time in minutes until the internal power supply switches to sleep mode
    • type: <GType gint (24)>
  63. staple-detect
    • constraint: ['Default', 'Off', 'On']
    • initial_value: (Exception: libinsane-quark: Libinsane opt[staple-detect]->get_value() error: 0x40000008, Access denied (9))
    • title: Staple detection
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Request scanner to detect jams in the ADF caused by staples
    • type: <GType gchararray (64)>
  64. endorser-dir
    • constraint: ['Top to bottom', 'Bottom to top']
    • initial_value: (Exception: libinsane-quark: Libinsane opt[endorser-dir]->get_value() error: 0x40000008, Access denied (9))
    • title: Endorser direction
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Endorser printing direction.
    • type: <GType gchararray (64)>
  65. bp-filter
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[bp-filter]->get_value() error: 0x40000008, Access denied (9))
    • title: BP filter
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Improves quality of high resolution ball-point pen text
    • type: <GType gboolean (20)>
  66. df-diff
    • constraint: ['Default', '10mm', '15mm', '20mm']
    • initial_value: (Exception: libinsane-quark: Libinsane opt[df-diff]->get_value() error: 0x40000008, Access denied (9))
    • title: DF length difference
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Difference in page length to trigger double feed error
    • type: <GType gchararray (64)>
  67. a3-paper
    • constraint: []
    • initial_value: False
    • title: A3 paper
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: A3 paper detected
    • type: <GType gboolean (20)>
  68. threshold-white
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[threshold-white]->get_value() error: 0x40000008, Access denied (9))
    • title: Threshold white
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Set pixels equal to threshold to white instead of black
    • type: <GType gboolean (20)>
  69. matrix-4x4
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[matrix-4x4]->get_value() error: 0x40000008, Access denied (9))
    • title: Matrix 4x4
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Remove 4 pixel square noise
    • type: <GType gboolean (20)>
  70. mode
    • constraint: ['Lineart', 'Halftone', 'Gray', 'Color']
    • initial_value: Color
    • title: Scan mode
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Selects the scan mode (e.g., lineart, monochrome, or color).
    • type: <GType gchararray (64)>
  71. a4-paper
    • constraint: []
    • initial_value: False
    • title: A4 paper
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: A4 paper detected
    • type: <GType gboolean (20)>
  72. overscan
    • constraint: ['Default', 'Off', 'On']
    • initial_value: Default
    • title: Overscan
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Collect a few mm of background on top side of scan, before paper enters ADF, and increase maximum scan area beyond paper size, to allow collection on remaining sides. May conflict with bgcolor option
    • type: <GType gchararray (64)>
  73. separation
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[separation]->get_value() error: 0x40000008, Access denied (9))
    • title: Separation
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Enable automatic separation of image and text
    • type: <GType gboolean (20)>
  74. swskip
    • constraint: [0.0, 100.0, 0.100006103515625]
    • initial_value: 0.0
    • title: Software blank skip percentage
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_PERCENT of type Libinsane.Unit>
    • desc: Request driver to discard pages with low percentage of dark pixels
    • type: <GType gdouble (60)>
  75. gamma-curve
    • constraint: [0, 3, 1]
    • initial_value: (Exception: libinsane-quark: Libinsane opt[gamma-curve]->get_value() error: 0x40000008, Access denied (9))
    • title: Gamma curve
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Gamma curve, from light to dark, but upper two may not work
    • type: <GType gint (24)>
  76. endorser
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[endorser]->get_value() error: 0x40000008, Access denied (9))
    • title: Endorser
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Enable endorser unit
    • type: <GType gboolean (20)>
  77. endorser-y
    • constraint: [0.0, 863.48876953125, 0.0211639404296875]
    • initial_value: (Exception: libinsane-quark: Libinsane opt[endorser-y]->get_value() error: 0x40000008, Access denied (9))
    • title: Endorser Y
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_MM of type Libinsane.Unit>
    • desc: Endorser print offset from top of paper.
    • type: <GType gdouble (60)>
  78. b5-paper
    • constraint: []
    • initial_value: False
    • title: B5 paper
    • capabilities: <flags LIBINSANE_CAPABILITY_HW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: B5 paper detected
    • type: <GType gboolean (20)>
  79. swdeskew
    • constraint: []
    • initial_value: False
    • title: Software deskew
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Request driver to rotate skewed pages digitally.
    • type: <GType gboolean (20)>
  80. endorser-val
    • constraint: [0, 65535, 1]
    • initial_value: (Exception: libinsane-quark: Libinsane opt[endorser-val]->get_value() error: 0x40000008, Access denied (9))
    • title: Endorser value
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Initial endorser counter value.
    • type: <GType gint (24)>
  81. hwdeskewcrop
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[hwdeskewcrop]->get_value() error: 0x40000008, Access denied (9))
    • title: Hardware deskew and crop
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Request scanner to rotate and crop pages digitally.
    • type: <GType gboolean (20)>
  82. buffermode
    • constraint: ['Default', 'Off', 'On']
    • initial_value: (Exception: libinsane-quark: Libinsane opt[buffermode]->get_value() error: 0x40000008, Access denied (9))
    • title: Buffer mode
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Request scanner to read pages quickly from ADF into internal memory
    • type: <GType gchararray (64)>
  83. prepick
    • constraint: ['Default', 'Off', 'On']
    • initial_value: Default
    • title: Prepick
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Request scanner to grab next page from ADF
    • type: <GType gchararray (64)>
  84. df-skew
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[df-skew]->get_value() error: 0x40000008, Access denied (9))
    • title: DF skew
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Enable double feed error due to skew
    • type: <GType gboolean (20)>
  85. awd
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[awd]->get_value() error: 0x40000008, Access denied (9))
    • title: Auto width detection
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Scanner detects paper sides. May reduce scanning speed.
    • type: <GType gboolean (20)>
  86. ink-remain
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[ink-remain]->get_value() error: 0x40000008, Access denied (9))
    • title: Ink remaining
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Imprinter ink level
    • type: <GType gint (24)>
  87. offtimer
    • constraint: [0, 960, 1]
    • initial_value: (Exception: libinsane-quark: Libinsane opt[offtimer]->get_value() error: 0x40000008, Access denied (9))
    • title: Off timer
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Time in minutes until the internal power supply switches the scanner off. Will be rounded to nearest 15 minutes. Zero means never power off.
    • type: <GType gint (24)>
  88. matrix-3x3
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[matrix-3x3]->get_value() error: 0x40000008, Access denied (9))
    • title: Matrix 3x3
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Remove 3 pixel square noise
    • type: <GType gboolean (20)>
  89. endorser-string
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[endorser-string]->get_value() error: 0x40000008, Access denied (9))
    • title: Endorser string
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Endorser alphanumeric print format. %05ud or %08ud at the end will be replaced by counter value.
    • type: <GType gchararray (64)>
  90. br-x
    • constraint: [0.0, 224.845703125, 0.0211639404296875]
    • initial_value: 224.845703125
    • title: Bottom-right x
    • capabilities: <flags LIBINSANE_CAPABILITY_SW_SELECT of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_MM of type Libinsane.Unit>
    • desc: Bottom-right x position of scan area.
    • type: <GType gdouble (60)>
  91. smoothing
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[smoothing]->get_value() error: 0x40000008, Access denied (9))
    • title: Smoothing
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Enable smoothing for improved OCR
    • type: <GType gboolean (20)>
  92. ink-low
    • constraint: []
    • initial_value: (Exception: libinsane-quark: Libinsane opt[ink-low]->get_value() error: 0x40000008, Access denied (9))
    • title: Ink low
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Imprinter ink running low
    • type: <GType gboolean (20)>
  93. threshold-curve
    • constraint: [0, 7, 1]
    • initial_value: (Exception: libinsane-quark: Libinsane opt[threshold-curve]->get_value() error: 0x40000008, Access denied (9))
    • title: Threshold curve
    • capabilities: <flags 0 of type Libinsane.Capability>
    • unit: <enum LIBINSANE_UNIT_NONE of type Libinsane.Unit>
    • desc: Threshold curve, from light to dark, but upper two may not be linear
    • type: <GType gint (24)>

Testscan

OS: Linux

erfolgreiche Tests: True

  • Quelle: feeder Front
  • Auslösung: 150 dpi
  • Modus: Color

247_traces.txt: [raw] [colorized]

image_247_0.png:
scan result image_247_0.png image_247_0_boxes.png:
scan result image_247_0_boxes.png

Zusätzliche Informationen

  • OS type: posix
  • Test program: ironscanner 1.2-5-gf13633f
  • Scan library: Libinsane 0.9-6-g48d1def
  • Pillow: 4.0.0
  • Python version: 3.5.3 (default, Sep 27 2018, 17:25:39) [GCC 6.3.0 20170516]
  • Architecture:
  • Platform:
    • Short: Linux
    • Detailed: Linux-4.15.0-46-generic-x86_64-with-Ubuntu-18.04-bionic
    • Release:
    • System: Linux
  • Architecture:
  • CPU frequency: 3100
  • Number of CPUs: 2
  • Processor: x86_64
  • Machine: x86_64
  • Memory: 16492290048

REST API link: /api/v1/scannerdb/scan_reports/247/