Scan Bericht 128 - FUJITSU ScanSnap S1300i

Scanner

  • Hersteller: FUJITSU
  • Modell: ScanSnap S1300i
  • Name: epjitsu:libusb:003:002
  • Device ID: epjitsu:libusb:003:002
  • Typ: Adf_Duplex
 scanner type
  1. contrast
    • size: 4
    • constraint: (-127, 127, 1)
    • capabilities: <class 'pyinsane2.sane.rawapi.SaneCapabilities'> :[ Soft_select, Soft_detect,]
    • type: <class 'pyinsane2.sane.rawapi.SaneValueType'> : Integer (1)
    • contrainttype: <class 'pyinsane2.sane.rawapi.SaneConstraintType'> : Range (1)
    • initial_value: 0
    • desc: Controls the contrast of the acquired image.
    • unit: <class 'pyinsane2.sane.rawapi.SaneUnit'> : None (0)
    • title: Contrast
  2. page-width
    • size: 4
    • constraint: (177536, 14380416, 1387)
    • capabilities: <class 'pyinsane2.sane.rawapi.SaneCapabilities'> :[ Soft_select, Soft_detect,]
    • type: <class 'pyinsane2.sane.rawapi.SaneValueType'> : Fixed (2)
    • contrainttype: <class 'pyinsane2.sane.rawapi.SaneConstraintType'> : Range (1)
    • initial_value: 14147400
    • desc: Specifies the width of the media. Required for automatic centering of sheet-fed scans.
    • unit: <class 'pyinsane2.sane.rawapi.SaneUnit'> : Mm (3)
    • title: Page width
  3. page-height
    • size: 4
    • constraint: (0, 29537552, 1387)
    • capabilities: <class 'pyinsane2.sane.rawapi.SaneCapabilities'> :[ Soft_select, Soft_detect,]
    • type: <class 'pyinsane2.sane.rawapi.SaneValueType'> : Fixed (2)
    • contrainttype: <class 'pyinsane2.sane.rawapi.SaneConstraintType'> : Range (1)
    • initial_value: 19140600
    • desc: Specifies the height of the media, 0 will auto-detect.
    • unit: <class 'pyinsane2.sane.rawapi.SaneUnit'> : Mm (3)
    • title: Page height
  4. page-loaded
    • size: 4
    • constraint: None
    • capabilities: <class 'pyinsane2.sane.rawapi.SaneCapabilities'> :[ Hard_select, Soft_detect, Advanced,]
    • type: <class 'pyinsane2.sane.rawapi.SaneValueType'> : Boolean (0)
    • contrainttype: <class 'pyinsane2.sane.rawapi.SaneConstraintType'> : None (0)
    • initial_value: 1
    • desc: Page loaded
    • unit: <class 'pyinsane2.sane.rawapi.SaneUnit'> : None (0)
    • title: Page loaded
  5. power-save
    • size: 4
    • constraint: None
    • capabilities: <class 'pyinsane2.sane.rawapi.SaneCapabilities'> :[ Hard_select, Soft_detect, Advanced,]
    • type: <class 'pyinsane2.sane.rawapi.SaneValueType'> : Boolean (0)
    • contrainttype: <class 'pyinsane2.sane.rawapi.SaneConstraintType'> : None (0)
    • initial_value: 0
    • desc: Scanner in power saving mode
    • unit: <class 'pyinsane2.sane.rawapi.SaneUnit'> : None (0)
    • title: Power saving
  6. threshold-curve
    • size: 4
    • constraint: (0, 127, 1)
    • capabilities: <class 'pyinsane2.sane.rawapi.SaneCapabilities'> :[ Soft_select, Soft_detect,]
    • type: <class 'pyinsane2.sane.rawapi.SaneValueType'> : Integer (1)
    • contrainttype: <class 'pyinsane2.sane.rawapi.SaneConstraintType'> : Range (1)
    • initial_value: 55
    • desc: Dynamic threshold curve, from light to dark, normally 50-65
    • unit: <class 'pyinsane2.sane.rawapi.SaneUnit'> : None (0)
    • title: Threshold curve
  7. resolution
    • size: 4
    • constraint: (50, 600, 1)
    • capabilities: <class 'pyinsane2.sane.rawapi.SaneCapabilities'> :[ Soft_select, Soft_detect,]
    • type: <class 'pyinsane2.sane.rawapi.SaneValueType'> : Integer (1)
    • contrainttype: <class 'pyinsane2.sane.rawapi.SaneConstraintType'> : Range (1)
    • initial_value: 300
    • desc: Sets the resolution of the scanned image.
    • unit: <class 'pyinsane2.sane.rawapi.SaneUnit'> : Dpi (4)
    • title: Scan resolution
  8. tl-x
    • size: 4
    • constraint: (0, 13969864, 1387)
    • capabilities: <class 'pyinsane2.sane.rawapi.SaneCapabilities'> :[ Inactive,]
    • type: <class 'pyinsane2.sane.rawapi.SaneValueType'> : Fixed (2)
    • contrainttype: <class 'pyinsane2.sane.rawapi.SaneConstraintType'> : Range (1)
    • initial_value: (Exception: <class 'pyinsane2.sane.rawapi.SaneStatus'> : Data is invalid (4))
    • desc: Top-left x position of scan area.
    • unit: <class 'pyinsane2.sane.rawapi.SaneUnit'> : Mm (3)
    • title: Top-left x
  9. br-y
    • size: 4
    • constraint: (177536, 19140600, 1387)
    • capabilities: <class 'pyinsane2.sane.rawapi.SaneCapabilities'> :[ Inactive,]
    • type: <class 'pyinsane2.sane.rawapi.SaneValueType'> : Fixed (2)
    • contrainttype: <class 'pyinsane2.sane.rawapi.SaneConstraintType'> : Range (1)
    • initial_value: (Exception: <class 'pyinsane2.sane.rawapi.SaneStatus'> : Data is invalid (4))
    • desc: Bottom-right y position of scan area.
    • unit: <class 'pyinsane2.sane.rawapi.SaneUnit'> : Mm (3)
    • title: Bottom-right y
  10. top-edge
    • size: 4
    • constraint: None
    • capabilities: <class 'pyinsane2.sane.rawapi.SaneCapabilities'> :[ Hard_select, Soft_detect, Advanced,]
    • type: <class 'pyinsane2.sane.rawapi.SaneValueType'> : Boolean (0)
    • contrainttype: <class 'pyinsane2.sane.rawapi.SaneConstraintType'> : None (0)
    • initial_value: 0
    • desc: Paper is pulled partly into adf
    • unit: <class 'pyinsane2.sane.rawapi.SaneUnit'> : None (0)
    • title: Top edge
  11. br-x
    • size: 4
    • constraint: (177536, 14147400, 1387)
    • capabilities: <class 'pyinsane2.sane.rawapi.SaneCapabilities'> :[ Inactive,]
    • type: <class 'pyinsane2.sane.rawapi.SaneValueType'> : Fixed (2)
    • contrainttype: <class 'pyinsane2.sane.rawapi.SaneConstraintType'> : Range (1)
    • initial_value: (Exception: <class 'pyinsane2.sane.rawapi.SaneStatus'> : Data is invalid (4))
    • desc: Bottom-right x position of scan area.
    • unit: <class 'pyinsane2.sane.rawapi.SaneUnit'> : Mm (3)
    • title: Bottom-right x
  12. tl-y
    • size: 4
    • constraint: (0, 18963064, 1387)
    • capabilities: <class 'pyinsane2.sane.rawapi.SaneCapabilities'> :[ Soft_select, Soft_detect,]
    • type: <class 'pyinsane2.sane.rawapi.SaneValueType'> : Fixed (2)
    • contrainttype: <class 'pyinsane2.sane.rawapi.SaneConstraintType'> : Range (1)
    • initial_value: 0
    • desc: Top-left y position of scan area.
    • unit: <class 'pyinsane2.sane.rawapi.SaneUnit'> : Mm (3)
    • title: Top-left y
  13. source
    • size: 11
    • constraint: ['ADF Front', 'ADF Back', 'ADF Duplex']
    • capabilities: <class 'pyinsane2.sane.rawapi.SaneCapabilities'> :[ Soft_select, Soft_detect,]
    • type: <class 'pyinsane2.sane.rawapi.SaneValueType'> : String (3)
    • contrainttype: <class 'pyinsane2.sane.rawapi.SaneConstraintType'> : String list (3)
    • initial_value: ADF Front
    • desc: Selects the scan source (such as a document-feeder).
    • unit: <class 'pyinsane2.sane.rawapi.SaneUnit'> : None (0)
    • title: Scan source
  14. cover-open
    • size: 4
    • constraint: None
    • capabilities: <class 'pyinsane2.sane.rawapi.SaneCapabilities'> :[ Hard_select, Soft_detect, Advanced,]
    • type: <class 'pyinsane2.sane.rawapi.SaneValueType'> : Boolean (0)
    • contrainttype: <class 'pyinsane2.sane.rawapi.SaneConstraintType'> : None (0)
    • initial_value: 0
    • desc: Cover open
    • unit: <class 'pyinsane2.sane.rawapi.SaneUnit'> : None (0)
    • title: Cover open
  15. gamma
    • size: 4
    • constraint: (19660, 327680, 655)
    • capabilities: <class 'pyinsane2.sane.rawapi.SaneCapabilities'> :[ Inactive,]
    • type: <class 'pyinsane2.sane.rawapi.SaneValueType'> : Fixed (2)
    • contrainttype: <class 'pyinsane2.sane.rawapi.SaneConstraintType'> : Range (1)
    • initial_value: (Exception: <class 'pyinsane2.sane.rawapi.SaneStatus'> : Data is invalid (4))
    • desc: Changes intensity of midtones
    • unit: <class 'pyinsane2.sane.rawapi.SaneUnit'> : None (0)
    • title: Gamma function exponent
  16. threshold
    • size: 4
    • constraint: (0, 255, 1)
    • capabilities: <class 'pyinsane2.sane.rawapi.SaneCapabilities'> :[ Soft_select, Soft_detect,]
    • type: <class 'pyinsane2.sane.rawapi.SaneValueType'> : Integer (1)
    • contrainttype: <class 'pyinsane2.sane.rawapi.SaneConstraintType'> : Range (1)
    • initial_value: 120
    • desc: Select minimum-brightness to get a white point
    • unit: <class 'pyinsane2.sane.rawapi.SaneUnit'> : None (0)
    • title: Threshold
  17. mode
    • size: 8
    • constraint: ['Lineart', 'Gray', 'Color']
    • capabilities: <class 'pyinsane2.sane.rawapi.SaneCapabilities'> :[ Soft_select, Soft_detect,]
    • type: <class 'pyinsane2.sane.rawapi.SaneValueType'> : String (3)
    • contrainttype: <class 'pyinsane2.sane.rawapi.SaneConstraintType'> : String list (3)
    • initial_value: Lineart
    • desc: Selects the scan mode (e.g., lineart, monochrome, or color).
    • unit: <class 'pyinsane2.sane.rawapi.SaneUnit'> : None (0)
    • title: Scan mode
  18. scan
    • size: 4
    • constraint: None
    • capabilities: <class 'pyinsane2.sane.rawapi.SaneCapabilities'> :[ Hard_select, Soft_detect, Advanced,]
    • type: <class 'pyinsane2.sane.rawapi.SaneValueType'> : Boolean (0)
    • contrainttype: <class 'pyinsane2.sane.rawapi.SaneConstraintType'> : None (0)
    • initial_value: 0
    • desc: Scan button
    • unit: <class 'pyinsane2.sane.rawapi.SaneUnit'> : None (0)
    • title: Scan button
  19. brightness
    • size: 4
    • constraint: (-127, 127, 1)
    • capabilities: <class 'pyinsane2.sane.rawapi.SaneCapabilities'> :[ Soft_select, Soft_detect,]
    • type: <class 'pyinsane2.sane.rawapi.SaneValueType'> : Integer (1)
    • contrainttype: <class 'pyinsane2.sane.rawapi.SaneConstraintType'> : Range (1)
    • initial_value: 0
    • desc: Controls the brightness of the acquired image.
    • unit: <class 'pyinsane2.sane.rawapi.SaneUnit'> : None (0)
    • title: Brightness

Testscan

OS: Linux

erfolgreiche Tests: False

  • Quelle: ADF Front
  • Auslösung: 150 dpi
  • Modus: Color
Scan stopped after about 10cm of paper. Error was:

INFO   ### SCAN TEST ###
INFO   Configuring scanner: source = ADF Front
INFO   [source] set to [ADF Front]
INFO   Configuring scanner: resolution = 150
INFO   [resolution] set to [150]
INFO   Configuring scanner: mode = Color
INFO   [mode] set to [Color]
INFO   Maximizing scan area ...
WARNING Unable to set scanner option [tl-x]: Option is not active
WARNING Unable to set scanner option [br-x]: Option is not active
WARNING Unable to set scanner option [br-y]: Option is not active
INFO   Starting scan session ...
INFO   Expected image size: (1296, 2587)
INFO   Scanning page 0
INFO   Available lines: (0, 0)
INFO   ### SCAN TEST FAILED ###
Traceback (most recent call last):
  File "site-packages/ironscanner-1.1.0-py3.5.egg/ironscanner/main.py", line 747, in run
  File "site-packages/pyinsane2-2.0.12-py3.5.egg/pyinsane2/sane/abstract_proc.py", line 197, in get_image
  File "site-packages/pyinsane2-2.0.12-py3.5.egg/pyinsane2/sane/abstract_proc.py", line 74, in remote_do
AssertionError
All done !

128_traces.txt: [raw] [colorized]

Zusätzliche Informationen

  • OS type: posix
  • Test program: ironscanner 1.1.0-17-g3e34780
  • Scan library: pyinsane2 2.0.12-21-g54764bf
  • Pillow: 5.1.0
  • Python version: 3.5.3 (default, Jan 19 2017, 14:11:04) [GCC 6.3.0 20170118]
  • Architecture:
  • Platform:
    • Short: Linux
    • Detailed: Linux-4.13.0-38-generic-x86_64-with-Ubuntu-17.10-artful
    • Release:
    • System: Linux
  • Architecture:
  • CPU frequency: 3100
  • Number of CPUs: 4
  • Processor: x86_64
  • Machine: x86_64
  • Memory: 8175382528

Reported by: [Konrad Anton]

REST API link: /api/v1/scannerdb/scan_reports/128/