WU

ABELDEN BRAND

Cut the cable squarely. Using a fixed blade with a prep tool in Fold back the braid. If using tri-shield

good condition, prepare the cable to or quad-shield cables, remove the

5/16” x 1/4” x 1/4” dimensions. Use the additional foil layer and fold back the

edge of the tool if there is no stop. remaining braid.

Ensure the cable is prepared to the Use the guage on the VT tool to check Guide the center conductor and

proper dimensions. the dimension of the center conductor. dielectric into the connector post. Insert

the cable into the connector until the

dielectric is flush within the post.

Here you can see the dielectric is flush Properly seat the connector in the VT Install the connector onto the port and

within the post. tool and fully compress it. tighten to recommended torque.

Part Number Description

EX59 EX® Series universal compression connector for 59 series cable

EX6 EX Series universal compression connector for 6 series cable

S EX59PLUS EX SignalTight® Series universal compression connector for 59 series cable

© EX6PLUS EX SignalTight Series universal compression connector for 6 series cable

Ss VT-300 Universal compression tool, standard body

>

®

This product may be protected by one or more patents » For further information, please visit: www.ppc-online.com/patents

customerservice@ppc-online.com + 1-800-800-6652 + www.ppc-online.com